Reviews of Wunderlich WunderBob rear conversion kit for R NINE T

Wunderlich Wunderbob Conversion Kit neil taylor on Nov 27, 2020

Rating: 4

The quality of the Wumderlich "Wunderbob" seat conversion kit is very good. BUT the quality of the fixings (bolts & screws) leave a lot to be desired. Nearly all the bolts are matt black, possibly for the stealth look, I don't know. They look cheap against the black OEM bolts on the R9T, I have replaced all of mine with stainless steel ones from Ebay. The 2 small M3 bolts that hold on the rear tail / stop light screw easily into the main part of the kit by hand but when they are put through the holes in the light fitting and then fitted to the main part of the kit you will need a screwdriver as the holes must be slightly out on alignment. These bolts need to be cut down in length so that they do not damage the seat when fitted, so you need to fit them before hand to find the correct length needed. As I said you need a screwdriver to screw them in as there is a slight resistance, on finding the correct length needed as I was unscrewing the one bolt the phillips / slotted head of the bolt, the phillips part of the head "stripped". I was using the correct size phillips screwdriver, lucky I was still able to unscrew the bolt using the slotted part of the bolt head, not good. So again I purchased 2 stainless steel allen key head bolts from Ebay at the correct length. Now all the fixings have been replaced with quality items - no problems