OFFERS Click here

R1300GS accessories. click here

R12 and R12 nine T accessories click here

F900GS, Adventure and F800GS accessories. click here

Choose your Bike...

...Or pick a department

HEX GEN II ezCAN Combo with wiring F750GS/850GS, F900XR, S1000XR (all years), K1600 series, late R NINE T

£248.90 £229.90

Part No: HEX-H3-EZK-002W

In stock

Sorry, this item out of stock. However, if you would like us to email you when this comes back into stock, enter your email address below.

Sorry, this item is out of stock.

Sorry, this item is temporarily unavailable.

See product text for delivery date.

This is the Generation 2 version (GEN II) and comes with spotlight, horn and rear light wiring.

Here are the changes over the previous version:

• it has 4x high power outputs (10A continuous per channel/ 25A, max 20 seconds)

• the silver tube is slightly longer

• it has MT connectors rather than SuperSeal connectors

• the channels have ultimate configuration, meaning that if a user wants 4x brake light channels, it is possible to configure the ezCAN in this way

Simplify adding electrical components to your motorcycle and customize their functions with the HEX ezCAN accessory manager for your F750GS/850GS, F900XR, S1000XR (all years), K1600 series, late R NINE T. This device is ready to power left and right auxiliary lights on individual, high power, 10 amp continuous to 25 amp peak output circuits as well as an auxiliary brake light and accessory power on separate, low power, 4 amp output.

This is the Version 2 iteration of the ezCAN that now features three-wire dimming to control DENALI or other driving lights that can accept a third (data) wire for dimming purposes.

The ezCAN allows you to control those four circuits without adding any additional switches to your BMW. All switching functions are managed through the BMW's original handlebar switches and the Multi Controller we sometimes call the wonder wheel. How does the ezCAN do that? Magic! No, not really; in fact, the ezCAN connects to the BMW's CAN-Bus system to pick up things like switch position and whether the high beams are on or off.

With the free, downloadable, MAC or Windows PC compatible HEX ezCAN software, you can also modify your setup with your computer via a waterproof USB connection to modify which devices receive high or low power, power an auxiliary horn as well and control the functionality of your auxiliary lighting, brake lights, or accessories to meet your needs and preferences.

The downloadable Mac and Windows PC versions of the HEX ezCAN software allows (down load at www. configuration and mapping of the 4 colour coded output channels.

These channels can power:

• Left and right auxiliary driving lights

• A high-power horn

• An auxiliary brake light

• Any 12-volt accessory


• Simple downloadable software for configuration changes – down load at www.

• Independent control of left and right auxiliary driving lights

• Separate settings for daylight and night time running (based on the CAN-Bus-derived light sensor)

• Modulated brake light

• No need for a separate relay for a high-power horn

• New 3-wire dimming control for DENALI and other lights with data-driven dimming circuits

• Retains 2-wire dimming capability

• Auxiliary 12-volt switched output

• Waterproof and dust-proof

• Single switch control of devices

• Enables additional safety features

• Will not void warranty

• Plugs into and is compatible with existing CAN-Bus system

• Configurable via USB with Mac and PC software

• 4 output channels with fuse protection

• Waterproof micro USB connector

• Battery connection with fuse

• 2 CAN-Bus connectors for in line connecting

• 2 high power outputs (10A continuous / 25A max for 20 seconds)

• 2 low power outputs (4A continuous)

• Device measures 2.2in long by 1.2in wide by 0.6in thick


• HEX ezCAN device

• Micro USB cable

• Two Velcro strips

• Four cable ties

• Four stub connectors

• Two blank connectors

The HEX wiring kit details:

• Four extension wires

• 1m cable that can be trimmed to the correct length

• Female connectors with terminals and seals are provided so that they can be used when cable is trimmed to length

• Male connectors to be used on your auxiliary lights and wires to your accessories

• Heat-shrink to finish off sheath when cable is trimmed

• Sheathing for finishing of wiring on the light side

• You can also connect the output stubs to the extension cable to wire up your aux lights

Fits these models:

• 2012-2019 K1600GT

• 2012-2019 K1600GTL

• 2018 on K1600 Bagger

• 2019 F750GS

• 2019 F850GS/Adventure

• 2020 on F900R/XR

• 2015-2019 S1000XR

• 2020 on S1000XR

• 2018 on R NINE T if the left hand switch gear has a MENU button and not a button that says TRIP/INFO