Wunderlich Wheel spindle multi tool - all R1200 models, F & K series, R1250GS, R1250RT

If you need to remove the front wheel, a 22 mm hexagon socket or a BMW workshop is required. Most tyre repair shops don’t have this large hexagon socket, and this size is not a commonly available tool. With this recurring problem in mind, we have designed our own tool that makes changing a wheel possible for a start, and adds many valuable additional functions to your on-board toolkit.
Standard ¼” screwdriver bits can be inserted into the hex shaped hole on the end.
The facts:
• Can be operated using a ratchet and a 17 mm socket, or a round bar (using the side bores in tool body) or if needed in an emergency with a 17 mm wrench.
• 22 mm hexagon head for removing/fitting the front wheel spindle.
• Bit holder with integrated magnet (holds the bit securely in the holder).
• Square head for all 1/2 inch sockets (as ratchet substitute).
• Very strong aluminum, blue anodized.
• Note: Maximum torque of 100 NM/73 ft.-lbs can be applied to the hexagon (but not for the bit insert!)
Tip: add a variety of commonly available ¼” Torx and screw bits and together with the “MultiTool” you’ll have a nearly complete toolkit for roadside repairs, using minimal space.

Fits:
F750GS/850GS
F 800 R / S / ST/ GT
F 800 GS and Adventure
K 1200 GT
K 1300 GT
K 1200 R / Sport / S
K 1300 S / R
K1600GT/GTL
R 1200 GS + Adventure ALL YEARS
R 1200 GS LC (2013 onwards)
R 1200 GS Adventure (2014 onwards)
R1250GS
R 1200 R
R 1200 RT
R 1200 RT LC
R1250RT
R 1200 ST
R1200R LC
R1250R
R1200RS LC
R1250RS
R NINE T
Scrambler
Racer
Urban
Pure

CHEAPER IF BROUGHT AS PART OF KIT REFERENCE:
WUN-TOOLSX3