Generation II version is here with these benefits:
WHAT'S NEW?
* All four circuits provide a full 10 amps of power.
* Features two new auxiliary light settings.
* Modulate your spotlights for added visibility.
* Set your left and right side lights to
independently cancel.
* Improved diagnostics.
* New circuitry design.
Gen II - More Features, More Power, More Versatile
Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.
Denali Gen II Can Bus CanSmart Unit For K1600GT/GTL/Sport/Bagger/GA, F750GS, F850GS/Adventure, S1000XR
Harness the flexibility and intelligence of your BMW CanBus electrical system to make installation of accessories drastically easier with the DENALI CanSmart Controller. The CanSmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches. No more tacked on switches or confounding wire routing. In addition, because the CanSmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories. The CAN smart’s four dedicated circuits are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to use right out of the box. Free software (for Mac or PC) allows you to customize these circuits, but the default settings will be right for the vast majority of installations.
It also features a flash to pass and strobe when horn active setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a smart brake light complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.
Want more flexibility? We thought you might. You can set any of the four circuits to Simple Circuit Mode, which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. The electronic fuse is the only active setting so you can properly fuse your accessory.
Features:
* True Plug & Play installation
9. * New firmware allows full dimming control of two-wire circuits, including any brand of driving light
10. * Offers custom control of your electrical accessories
11. * 4 dedicated circuits pre-programmed to control two sets of auxiliary lights, an auxiliary horn, & an auxiliary brake light
12. * Each circuit is electronically fused and preconfigured to use right out of the box
13. * Features dozens of customizable settings that can be controlled with CanSmart Accessory Manager Software
14. * Flash to pass & strobe when horn active can strobe your auxiliary lights when you pulse the high beam or sound your horn
15. * Compatible with the DENALI B6 Auxiliary Brake Light for integrated running light, multiple flash pattern, deceleration & activated braking functionality
16. * Permits use of auxiliary horn like the DENALI Sound Bomb without having to add a relay or dedicated horn wiring harness
What's in the box:
• * CanSmart Controller
• * (2) 4ft light extension cables
• * 5ft Sound Bomb horn extension cable
• * Brake light pigtail
• * Zip-ties
• * Adhesive hook-and-loop fastener
• * Micro USB programming cable
To fit spotlights on the crash bars to your K1600GT/GTL/Sport/Bagger/GA you will also need:
1 x RAG-LAH.00.10300.B Denali crashbar light mounts black (22mm-28mm)
2 x RAG-DNL-DR1-050 Denali DR1 LED Light Pod with DataDim Technology
To fit spotlights on the bodywork to your K1600GT/GTL/Sport/Bagger/GA you will also need:
1 x RAG-LAH-07-10800 Denali Light Mount Bracket for K1600GT/GTL (to 2017) OR 1 x RAG-LAH-07-11200 Denali Light Mount Bracket for K1600GT/GTL (2018 on), K1600 Bagger
2 x RAG-DNL-DR1-050 Denali DR1 LED Light Pod with DataDim Technology
To fit spotlights on the crash bars to your F750GS/850GS/Adventure you will also need:
1 x RAG-LAH-07-11400 Denali Light Mount Bracket for F750GS/850GS/850 Adventure
2 x RAG-DNL.D4.050 Denali D4 LED Light Pod with DataDim Technology
Fits:
K1600GT/Sport
K1600GTL
K1600 Bagger
K1600 Grand America
F750GS/850GS
F900XR
S1000XR
2018 on R NINE T if the left hand switch gear has a MENU button and not a button that says TRIP/INFO
