We send free regular newsletters containing special offers, information and new products. Subscribe now:

AUTOSWITCH (AS7 VERSION)

AUTOSWITCH  (AS7 VERSION)

£20.00

inc VAT

Part No: AUT-AS7

 

Add To My Wishlist

Please complete the following information, including answering the security question at the bottom. This is required to prevent spam.

5/5

Richard on 27 Jan 2014

Bike Owned: Honda NT700VAA
Town: Pudsey
Country: United Kingdom

Very impressed. I was going to spend about £20 on a mechanical handlebar switch until this caught my attention. I use this to "drive" a Fuzeblock switchable fuse panel. Hardest part was to find a power source to connect the trigger wire to. I managed to find a blue/white cable that served both the flasher switch and the main beam switch. This switch manages to sense the difference and will only activate when the flasher is used. Wow!

4/5

Philip on 23 Oct 2013

Bike Owned: KTM Duke 690 R
Town: Newtownards
Country: United Kingdom

Dead easy to fit. I had fun finding the correct wire to use the headlight flash switch. The wires for the LED seem a bit overkill but it does the job well. Nice way to keep your bike looking less cluttered with more switches.

5/5

Martin on 25 Apr 2013

Bike Owned: BMW R1150GS
Town: Combles
Country: France

It does exactly what it says, easy to fit, fuss free and I used the last one without problems for 7 years. Well worth the money.

4/5

Lex on 28 Jan 2013

Bike Owned: BMW 1100GS
Town: Apeldoorn
Country: Netherlands

Great product, works really well.

4/5

Paul on 08 Jan 2013

Bike Owned: bmw r1200rt
Town: Budel
Country: Netherlands

Easy to install.
Works perfect.

5/5

Cor on 02 Jan 2013

Bike Owned: cordebruin4@gmail.com
Town: Almere
Country: Netherlands

Super product! Easy to install, works perfectly.

4/5

Andy on 16 Sep 2012

Bike Owned: BMW R1150GS
Town: Gloucester
Country: United Kingdom

The 'giso' switch for running spot fog / lights which opperates through the indicator cancel switch be it to turn the lights on or off, is a much easier way to ''wire'' up auxillary lights and less wiring too. So if your in the market for some fog/spot lights forget about finding an after market switch and then figuring out where to mount it, when one of these does it all at the press of the indiator cancel switch. So now you know.

5/5

Håkan on 24 Jul 2012

Bike Owned: BMW R1100GS
Town: Undersåker
Country: Sweden

A perfect little gadget! I installed two of them to control two sets of lights, both wired to the turn signal cancel button (aux=double tap, fog=long tap) on my GS. Works like a charm!

5/5

Mark on 10 Jun 2012

Bike Owned: Bmw r1150gs
Town: Berkel-enschot
Country: Netherlands

Great product easy to install, works great

5/5

Moto on 30 Mar 2012

Bike Owned: Aprilia Caponord Rally-Raid
Town: Civitaquana
Country: Italy

Excellent piece of kit, neat and simple to install. Works a treat with traditional (non-BMW) electrics.

5/5

G on 29 Nov 2011

Bike Owned: R1200gs
Town: Dereham
Country: United Kingdom

Great product, works really well.

Switch on spotlights or other accesories just by holding down the indicator cancel button !

For the newest BMW motorcycles with CAN-BUS technology. Now use the turn signal cancel button (TSC) on your R or K series from 2004 onwards

Already proven performance for R and K series bikes. See R1200GS installation (cut and paste this link):
http://autoswitch.com/2006/models/as6b/r1200gs_index.shtml

and the K1200GT installation: (cut and paste this link):
http://autoswitch.com/2006/models/as6b/k1200gt_index.shtml

Now featuring always ON red LED to tell you the spotlights are OFF. LED goes green when your spotlights or other accessory are ON.

Supplied with full instructions including wiring diagram.

Fits:
R1200GS
R1200GS (mark2) '08 on
R1200Adventure
R1200Adventure (mark2) '08 on
R1200RT
K1200GT
F800GS '08 on and '12 on

BUT also suitable for all older BMW models

And most other models with the Can-Bus wiring system.

Technical Information
·Housing Dimensions: 1.42" square, 0.315" thick ·Weight packaged: 0.244 Lb
·Wire type: #20 600V rated
·Relay Current Info: Max current draw for Autoswitch trigger wire (violet) is 200mA @12Volts With 150mA preffered maximum.
·Weight installed with wires: 0.202 Lb
·Wire lengths: Power feed, 24" Sense wire yellow 36"
·Package includes: 3 8" tie wraps, 6 4" tie wraps, 2 wire clips, adhesive tape, instructions

How It Works

The visual LED blinks rapidly during the timed "window" up to 10 seconds long when you should release the trigger signal (high beam switch). The single tap to flash the high beams or leaving the high beams on will not activate the Autoswitch. LED shines green to indicate power to your auxiliary lights relay.

Wiring
No information is currently provided.

Installation

The Autoswitch is easy to install. If you already have auxiliary driving lights installed with a controlling toggle switch and relay, Put the Autoswitch VIOLET wire where your toggle switch was connected on the relay coil pin. Tap the RED into any ignition-swtiched 'ON' wire for power, YELLOW wire to the high beam bulb wire. Add connection to ground, and neatly tuck the Autoswitch and wires out of the way in any convenient location. And without building a bracket, drilling any holes, or modifying your dash, you're done!

SEE HERE FOR FULL INSTRUCTIONS:

http://www.autoswitch.com/downloads/as7/directions-as7.pdf

Copy and paste into your brouser