AltRider stainless engine bars (black) - XTZ1200 Super Tenere
£288.00
inc VAT
Part No: ALT-SU10-2-1000
Please complete the following information, including answering the security question at the bottom. This is required to prevent spam.
In designing these crash bars, we went through the trouble of maintaining the hidden connector in the front to yield a seamless system. Why is that important? It means the energy of a hard impact on one side can be transferred throughout the bars and to the other side. The three mounts on one side don't have to take an entire impact load; instead, it is distributed across six mount mounts so none of them are overwhelmed. All of this is important because the crash bars will not only protect the fairing in the case of a crash, but also the Super Tenere's exposed radiator.
We also conducted a thorough study to identify the bike's contact points when on its side. This led to a crash bar design that offers a wide contact area between the crash bars and the ground. The other contact points will be the handlebar bar ends, and rear passenger peg - protecting the fairing, engine, radiator, and brake and shifter lever.
The crash bars are constructed and mounted so that both side panels have clearance to be accessed with the bars are still mounted. The gas tank cover can easily be removed in order to access the air filter. The right hand side is easy to access both the battery and glove box. With the left side, it is still possible to access, however it is a tight fit. We designed it this way since it is less likely the left side would be accessed.
Take a moment to review the instructions (see www.altrider.com). The reason we mention this here is to make you aware which mount points on the Super Tenere have strength.
You may also want to watch the installation video (see www.altrider.com). You'll see everything that comes with your purchase, the tools you'll need to complete the installation, and tips and tricks to make the process easier.
Features include:
· Stainless T-304 construction
· Hand TIG welding
· 1 inch diameter tubing for strength
· Height: 15 inches
· Width: 20 inches
· Depth: 18 inches
· Weight: 11.5 lbs
· Made in USA
Fits
XTZ1200 Super tenere
THIS PRODUCT IS ONLY FOR SALE TO THE UK, IRELAND, CHANNEL ISLANDS AND EUROPE